Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
Column Description
flags
Indicates channel flags. For more information on channel flags, see the flag
description below the channel scan time table.
timer-tick
Indicates the time interval since the last scan.
Scan mode
Indicates if the scan mode enabled on the Wi-Fi interface.
channel
(under WIFI Scanning
State)
Indicates the channels available on the Wi-Fi interface.
current-scan-channel
Indicates the current channel scanned.
last-dos-channel
Indicates the last channel on which Denial of Service (DOS) was detected.
timer-milli-tick
Indicates the time in milliseconds since the Wi-Fi interface channels were
scanned.
next-scan-milli-tick
(jitter)
Indicates the next interval at which the scanning will begin.
scans (Tot:Rej:Eff
(%):Last intvl(%))
Provides a summary of the Wi-Fi scanning details.
Command History
Version Description
Dell Networking W-Series Instant 6.2.1.0-
3.3
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Privileged EXEC mode