Reference Guide

0511587-03 | September 2014 Dell Networking W-Series Instant 6.4.2.0-4.1.1 | CLI Reference Guide
For all subnets, a deny rule is created by default as the last rule. If at least one rule is configured, the deny all
rule is applied to the upstream traffic by default.
Management access to the AP is allowed irrespective of the inbound firewall rule. For more information on
configuring restricted management access, see restricted-mgmt-access.
The inbound firewall is not applied to traffic coming through GRE tunnel.
Example
The following example configures inbound firewall rules:
(Instant AP)(config)# inbound-firewall
(Instant AP)(inbound-firewall)# rule 192.0.2.1 255.255.255.255 any any match 6 631 631 permit
(Instant AP)(inbound-firewall)# end
(Instant AP)# commit apply
Command History
Version Description
Dell Networking W-Series Instant 6.4.0.2-
4.1
This command is introduced.
Command Information
W-IAP Platform Command Mode
All platforms
Configuration mode and inbound firewall configuration sub-
mode.