Release Notes

12| Implementing Accounting-Based Authorization Amigopod |Technical Note
Your newly created role should appear as shown in the screenshot below:
Create RADIUS NAS Client
Navigate to RADIUS>NAS List and then click the Create tab.
Enter suitable values for the name and IP address fields, and select a NAS Type that is
marked as RFC 3576 capable.
NOTE If the network access server does not provide RFC 3576 support, the Amigopod RADIUS
server will not be able to disconnect sessions that are currently in progress. Ensure that
your NAS equipment has this capability, and that it is enabled for use with the Amigopod
Visitor Management Appliance.
Complete the form by providing a shared secret, and enter an optional description. Click
Create NAS Device.
Your NAS list should appear as shown in the screenshot below:
Create Terms of Use page
Navigate to RADIUS>Web Logins and then click the Create a new web login page link.
1. Enter a suitable name for the page, such as Terms of Use, provide a page name
terms_of_use (this will appear in the URL for the page), and optionally supply a
description.
2. Select the Cisco Systems vendor settings. Note that this page will not actually be
used to perform a web login, so the vendor settings are redundant, however they must
be entered to create the page.