Reference Guide

Dell PowerConnect W-AirWave 7.5 | Best Practices Guide Dell PowerConnect W-Series Specific Capabilities in AirWave | 27
Viewing Controller License Information
Follow these steps to view your controller’s license information in AirWave:
1. Navigate to the APs/Devices > Monitor page of a controller under AirWave management.
2. Select the License link in the Device Info section. A pop-up window appears listing all licenses.
Figure 20 License Popup from APs/Devices > Monitor
Rogue Device Classification
Complete this section if you have completed WMS Offload procedure above. After offloading WMS, AirWave
maintains the primary ARM, WIPS, and WIDS state classification for all devices discovered over-the-air.
To check and reclassify rogue devices, follow these steps:
1. Navigate to the Rogue > Detail page for the rogue device, as shown in .
Table 4 WIPS/WIDS to AirWave Controller Classification Matrix
AirWave Controller Classification ArubaOS (WIPS/WIDS)
Unclassified (default state) Unknown
Valid Valid
Suspected Neighbor Interfering
Neighbor Known Interfering
Suspected Rogue Suspected Rogue
Rogue Rogue
Contained Rogue DOS