Dell PowerConnect WAirWave 7.
Copyright © 2011 Dell PowerConnect W Networks, Inc. Dell PowerConnect W Networks trademarks include , Dell PowerConnect W Networks®, Dell PowerConnect W Wireless Networks®, the registered Dell PowerConnect W the Mobile Edge Company logo, and Dell PowerConnect W Mobility Management System®. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA.
Overview This guide is designed as a reference for installing the Dell PowerConnect W-AirWave using the CentOS software bundled with the .iso disc image. If you are installing AirWave on a VMware server, please consult Appendix B of the Dell PowerConnect WAirWave User Guide in support.dell.com/manuals for important installation instructions. If you are installing AirWave on a Red Hat Enterprise Linux server, contact Dell support at support.dell.com.
. Right-click on the AirWave Installation CD .iso disc image file and select “burnatonce”. When the burnatonce program opens, click the Write button. If burnatonce has not automatically associated to the .iso disc image, run burnatonce manually and select the AirWave install image from the Load menu. For help with CD burning software other than burnatonce, please refer to the user guide for that product and reference the option to create a CD from .iso disc image.
Steps 2-4: No user input Step 5: enter static IP configuration for the primary network interface Step 6: enter a display name for the Dell PowerConnect W-Airwave system Step 7: if a DNS entry exists for the IP address assigned to the AirWave server, enter „y‟ then the DNS hostname; otherwise enter „n‟ Step 8: enter a new root user password. This password should be secure and recorded in a safe place.
