Users Guide
76 | Configuring and Using Device Groups Dell Networking W-AirWave 7.7 | User Guide
Menu
Item
Description Refer to
Radio This page defines general 802.11 radio settings for device groups.
"Configuring
Radio
Settings for
Device
Groups" on
page 95
Controller
Config
This page manages ArubaOS Device Groups, AP Overrides, and other profiles specific to
Dell Networking W-Series devices on the network. Use this page as an alternative to the
Device Setup > Dell Networking W >Configuration page. The appearance of this page
varies depending on whether AirWave is configured for global configuration or group
configuration.
Dell
Networking
W-Series
Controller
Configuration
Guide
Instant
Config
This page manages Dell Networking W-Instant devices on the network.
Dell
Networking
W-Series
Instant User
Guide
Cisco
WLC
Config
This page consolidates controller-level settings from the Group Radio, Security, SSIDs,
Cisco WLC Radio and AAA Server pages into one navigation tree that is easier to
navigate, and has familiar layout and terminology. Bulk configuration for per-thin AP
settings, previously configured on the Group LWAPP APs tab, can now be performed from
Modify Devices on the APs/Devices > List page.
"Cisco WLC
Group
Configuration"
on page 99
PTMP
This page defines settings specific to Proxim MP devices when present. As such, this
page is only available when a Proxim MP device is added to this group.
"Configuring
Group PTMP
Settings" on
page 106.
Proxim
Mesh
This page defines mesh AP settings specific to Proxim devices when present.
"Configuring
Proxim Mesh
Radio
Settings" on
page 107
MACACL
This page defines MAC-specific settings that apply to Proxim, Symbol, and ProCurve 520
devices when present.
"Configuring
Group MAC
Access
Control Lists"
on page 109
Firmware This page manages firmware files for many devices.
"Specifying
Minimum
Firmware
Versions for
APs in a
Group" on
page 110
Compare
This page allows you to compare line item-settings between two device groups. On the
Groups > List page, select the Compare two groups link, select the two groups from the
drop-down menus, and then select Compare. Refer to
"Comparing
Device
Groups" on
page 111
This section also provides the following additional procedures for group-level configurations:
l "Deleting a Group" on page 112