Users Guide

Dell PowerConnect W-7200 Series Controller | Installation Guide Dell PowerConnect W-7200 Controller | 13
Disabling the LCD Screen
By default, the LCD screen is enabled. However, if your W-7200 controller is deployed in a location without
physical security, the LCD screen can be disabled through the CLI. When disabled, pushing one of the
navigation buttons will only illuminate the screen and display the slot, role, device name, and any alarms.
Additionally, it is possible to only disable the maintenance menu. This allows you to change the LED behavior
and view the device status but prevents upgrades and configuration changes.
Speed LED MODE: SPD - displays the speed of the port.
Exit Idle Mode EXIT IDLE MENU
Table 11 LCD Panel Mode: Status
Function/Menu Options Displays
ArubaOS Version ArubaOS X.X.X.X
PSU Status Displays status of the power supply unit.
PSU 0: [OK | FAILED | MISSING]
PSU 1: [OK | FAILED | MISSING]
Fan Tray Displays fan tray status.
FAN STATUS: [OK | ERROR | MISSING]
FAN TEMP: [OK | HIGH | SHUTDOWN]
Exit Status Menu EXIT STATUS
Table 12 LCD Panel Mode: Maintenance
Function/Menu Options Displays
Upgrade Image Upgrade the software image on the selected partition from a predefined location on the
attached USB flash device.
Partition [0 | 1] Upgrade Image [no | yes]
Upload Config Uploads the controller’s current configuration to a predefined location on the attached USB
flash device.
Upload Config [no | yes]
Erase Config Allows you to erase the current configuration.
Erase Config [no | yes]
Factory Default Allows you to return the controller to the factory default settings.
Factory Default [no | yes]
Media Eject Completes the reading or writing of the attached USB device.
Media Eject [no | yes]
System Reboot Allows you to reboot the controller.
Reboot [no | yes]
System Halt Allows you to halt the controller.
Halt [no | yes]
Exit Maintenance Menu EXIT MAINTENANCE
Table 10 LCD Panel Mode: LED Mode
Function/Menu Options Displays