Release Notes

Parameter Description Range Default
dns-domain
Name of domain that is resolved by
corporate DNS servers. Use this
parameter when configuring split
tunnel.
— —
double-encrypt
This parameter applies only to remote
APs. Use double encryption for traffic
to and from a wireless client that is
connected to a tunneled SSID.
When enabled, all traffic is re-
encrypted in the IPsec tunnel. When
disabled, the wireless frame is only
encapsulated inside the IPsec tunnel.
All other types of data traffic between
the controller and the AP (wired traffic
and traffic from a split-tunneled SSID)
are always encrypted in the IPsec
tunnel.
— disabled
dump-server
(For debugging purposes.) Specifies
the server to receive a core dump
generated when an AP process
crashes.
— —
gre-striping-ip
Specify an IPv4 address for the 802.11g
radio of the controller to allow LACP
enabled switches to send traffic for the
two controller radios on different links.
Recommended value for this parameter
is <LMS-IP_addr>+1.
NOTE: This parameter is deprecated
in ArubaOS 6.4.2.0.
— —
heartbeat-dscp
Define the DSCP value of AP
heartbeats.
Use this feature to prioritize AP
heartbeats and prevent the AP from
losing connectivity with the controller
over high-latency or
low-bandwidth WAN connections.
0-63 0
heartbeat-in <secs>
Set the interval between heartbeat mes-
sages between a remote or campus AP
and its associated controller. An
increase in the heartbeat interval
increases the time it will take for an AP
to detect the loss in connectivity to the
controller, but can reduce internet band-
width consumed by a remote AP.
1-60 secs 1 sec
led-mode
The operating mode for the AP LEDs.
This option is available on all 802.11n
indoor APplatforms.
normal
normal
Display LEDs in normal mode.
off
Turn off all LEDs.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide ap system-profile | 194