Release Notes

1561 | show poe Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
show poe
show poe [slot/port]
Description
Displays the PoE status of all or a specific port on the controller.
Syntax
No parameters.
Example
The output of this command shows the PoE status of port 10 in slot 1.
(host) # show poe 1/10
PoE Status
----------
Port Status Voltage(mV) Current(mA) Power (mW)
---- ------ ----------- ----------- ----------
FE 1/10 Off N/A N/A N/A
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers