Users Guide

240 | Secure Enterprise Mesh Dell PowerConnect W-Series ArubaOS 6.1 | User Guide
Viewing RF Management Settings
To view a complete list of 802.11a or 802.11g RF management profiles and their status:
show rf dot11a-radio-profile|dot11g-radio-profile
To view the settings of a specific RF management profile:
show rf dot11a-radio-profile|dot11g-radio-profile <profile-name>
Assigning a 802.11a/802.11g Profile
To assign an 802.11a or 802.11g RF management profile to an AP group:
ap-group <group> dot11a-radio-profile <profile-name>
-or-
ap-group <group> dot11g-radio-profile <profile-name>
To assign an 802.11a or 802.11g RF management profile to an individual AP:
ap-name <name> dot11a-radio-profile <profile-name>
-or-
ap-name <name> dot11g-radio-profile <profile-name>
Deleting a Profile
If no AP or AP group is using an RF management profile, you can delete that profile using the no parameter:
no rf dot11a-radio-profile <profile-name>
Mesh High-Throughput SSID Profiles
The mesh high-throughput SSID profile defines settings unique to 802.11n-capable, high-throughput APs. If
none of the APs in your mesh deployment are 802.11n-capable APs, you do not need to configure a high-
throughput SSID profile.
If you modify a currently provisioned and running high-throughput SSID profile, your changes take effect
immediately. You do not reboot the controller or the AP.
Managing Profiles In the WebUI
Use the following procedures to manage your high-throughput SSID profiles using the WebUI.
Creating a Profile
To create a high-throughput SSID profile:
1. Navigate to the Configuration > Wireless > AP Configuration window. Select either the AP Group or AP
Specific tab.
 If you selected AP Group, click the Edit button by the AP group for which you want to create the new
high-throughput SSID profile.
 If you selected AP Specific, click Edit button by the AP for which you want to create the new high-
throughput SSID profile.
2. In the Profiles list, expand the Mesh menu, then select Mesh High-throughput SSID profile.
3. In the Profile Details window pane, click the Mesh High-throughput SSID profile drop-down list and select
NEW.