Reference Guide

661 | show ap regulatory-domain-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
The output of this command includes the following information:
Command History
Introduced in ArubaOS 3.0.
Command Information
Column Description
Country Code Code that represents the country in which the APs will operate. The country code determines
the 802.11 wireless transmission spectrum.
Valid 802.11g channel Selected 802.11b/g channel available for use by an AP using the specified regulatory domain
profile. These channels are limited to those valid for the profile’s country code.
Valid 802.11a channel Selected 802.11a channel available for use by an AP using the specified regulatory domain
profile. These channels are limited to those valid for the country code.
Valid 802.11g 40MHz channel
pair
Selected 802.11b/g 40 MHz channel pair available for use by an AP using the specified domain
profile. These channels are limited to those valid for the profile’s country code.
Valid 802.11a 40MHz channel
pair
Selected 802.11a 40 MHz channel pair available for use by an AP using the specified domain
profile. These channels are limited to those valid for the profile’s country code.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers