Reference Guide

521 | show ap arm history Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
The output of this command includes the following information:
Command History
Introduced in ArubaOS 3.0.
Command Information
Parameter Description
Reason This column displays one of the following code to indicate why the channel or power change
was made.
z I: Interference
z R: Radar detected
z N: Noise exceeded
z E: Error threshold exceeded
z INV: Invalid Channel
z G: Rogue AP Containment
z M: Empty Channel
z P+: Increase Power
z P-: Decrease Power
z OFF: Turn off Radio
z ON: Turn on Radio
The Reason key appears at the bottom of the ARM History table.
Old Channel Channel number used by the AP interface before the ARM change.
New Channel Channel number used by the AP interface after the ARM change.
Old Power Power level of the AP interface before the ARM change.
New Power Power level of the AP interface after the ARM change.
Last Change Time elapsed since the change, in the format days:hours:minutes:seconds.
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master or local
controllers