Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide wms client | 1227
wms client
wms client <macaddr> mode {dos|interfering|valid}
Description
This command allows you to classify a wireless client into one of several categories.
Syntax
Usage Guidelines
ArubaOS can automatically determine client classification based on client behavior, but this command allows
you to explicitly classify a client. The classification of a client is used in certain policy enforcement features. For
example, if protect-valid-sta is enabled in the IDS Unauthorized Device Profile, then clients that are classified as
valid cannot connect to non-valid APs.
Example
The following command classifies a client as valid:
(host) #wms client 00:00:A4:34:C9:B3 mode valid
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description
client
MAC address of the client.
mode
Classify the client into one of the following categories:
dos
Enables denial of service to this client.
neighbor
A client seen in the RF environment that is outside of the enterprise.
valid
A client that is part of the enterprise.
Platforms Licensing Command Mode
All platforms Base operating system Enable mode on master controllers