Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide wlan ht-ssid-profile | 1208
Usage Guidelines
The ht-ssid-profile configures the high-throughput SSID.
De-aggregation of MAC Service Data Units (A-MSDUs) is supported on the W-3000 Controller Series controller
with a maximum frame transmission size of 4k bytes; however, this feature is always enabled and is not
configurable. Aggregation is not currently supported.
Example
The following command configures the maximum size of a received aggregate MDPU to be 8191 bytes for the
high-throughput SSID named “htcorpnet:”
(host) (config) #wlan ht-ssid-profile htcorpnet
max-rx-a-mpdu-size 8191
Command History
Command Information
supported-
mcs-
set
Comma-separated list of Modulation Coding Scheme (MCS) values or ranges of
values to be supported on this high-throughput SSID.
0-15 0-15
Parameter Description Range Default
Note: AP configuration settings related to the IEEE 802.11n standard are configurable for Dell W-AP120 series access points,
which are IEEE 802.11n standard compliant devices.
Version Description
ArubaOS 3.3 Command introduced
ArubaOS 3.3.1 The legacy-stations parameter was introduced
ArubaOS 3.3.2 De-aggregation of MAC Service Data Units (A-MSDUs) was introduced
Platforms Licensing Command Mode
All platforms but operates with
IEEE 802.11n compliant devices
only
Base operating system Config mode on master controllers