Reference Guide

1203 | wlan client-wlan-profile Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Syntax
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Parameter Description Default
auth-as-computer Authenticate with domain credentials.
auth-as-guest Authenticate as a guest user.
clone Copy settings from another WLAN client profile.
eap-cert If you select EAP type as certificate, you can use one of the following options:
z mschapv2-use-windows-credentials
z use-smartcard
z simple-certificate-selection
z use-different-name
z validate-server-certificate
—
eap-cert-connect-only-
to
Comma separated list of servers.
eap-peap Configure EAP-PEAP settings.
eap-peap-connect-only-
to
Comma separated list of servers.
eap-type Enter a EAP type used by client to connect to wireless network. EAP-PEAP
enable-8021x Select this option to enable 802.1x authentication for this network. Enabled
ieap-cert-connect-only Command separated list of servers
inner-eap Enter the inner EAP type. EAP-MSCHAPv2
inner-eap-type Specify one of the following:
z mschapv2-use-windows-credentials: Automatically use the Windows logon
name and password (and domain if any)
z use-smartcard: Use a smart card
z simple-certificate-selection: Use a certificate on the users computer or use
a simple certificate selection method (recommended)
z validate-server-certificate: Validate the server certificate
z use-different-name: Use a different user name for the connection (and not
the CN on the certificate)
no Negate and reset all configuration settings.
non-broadcasting-
connection
Connect even if WLAN is not broadcasting. Disabled
range-connect Automatically connect to this WLAN if in range.
ssid-profile Enter the name of the SSID profile.
Platforms Licensing Command Mode
All platforms Base operating system on master
controllers
Config mode on master controllers