Reference Guide

1124 | show wms general Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
Command History
This command was introduced in ArubaOS 3.0
Command Information
classification-
server-ip
IP address of an AMP (Airwave Management Platform) that will perform Rogue AP
classification. If there is a classification server defined, the wms-on-master and use-db
parameters will be disabled.
rtls-port Port number on the RTLS server to which WMS statistics should be sent.
wms-on-master The WMS process is enabled on the master controller.
use-db Shows if WMS data is updated to the database on the master controller.
calc-poll-interval Interval (in milliseconds) specifies the frequency with which an AP sends updates about
monitored APs and monitored clients to the controller. By default it uses the configured
poll-
interval
value. If the # of deployed radios is more than 30, the calc-poll-interval is computed as
2000*number-of-radios.
Switch IP IP address of the controller.
Is Master If enabled, the controller is a master controller. Otherwise, it is defined as a local controller.
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers
Column Description