Release Notes
AP-120-35-A2 default 120 172.20.72.243 Down 172.20.1.103 0.0.0.0
AP-124-29:3A default 124 172.20.72.252 Up 2d:2h:0m:22s 172.20.1.103 0.0.0.0
AP-124-5B:2A default 124abg 172.20.72.245 Up 2d:2h:0m:43s 172.20.1.103 0.0.0.0
AP-124-D7:D6 default 124 172.20.72.244 Up 2d:2h:0m:25s 172.20.1.103 0.0.0.0
AP-124-E5:41 default 124 172.20.72.248 Up 2d:2h:0m:10s 172.20.1.103 0.0.0.0
AP-124-F3:CE default 124 172.20.72.242 Up 2d:2h:0m:5s 172.20.1.103 0.0.0.0
AP-124-F3:DE default 124 172.20.72.247 Up 2d:2h:0m:32s 172.20.1.103 0.0.0.0
AP-124-F3:EA default 124 172.20.72.246 Up 2d:2h:0m:40s 172.20.1.103 0.0.0.0
AP-125-53:56 default 125 172.20.72.237 Up 2d:2h:0m:15s 172.20.1.103 0.0.0.0
AP-135-7F:A0 default 135 172.20.72.240 Up 2d:2h:0m:35s 172.20.1.103 0.0.0.0
VW-092-96:18 default 92 172.20.72.253 Up 2d:2h:2m:4s 172.20.1.103 0.0.0.0
VW-092-F3:03 default 92 172.20.72.235 Up 2d:1h:59m:53s 172.20.1.103 0.0.0.0
VW-092-F3:70 default 92 172.20.72.236 Up 2d:1h:59m:52s 172.20.1.103 0.0.0.0
VW-134-11:3C default 134 172.20.72.239 Up 2d:2h:0m:3s 172.20.1.103 0.0.0.0
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
X = Maintenance Mode; P = PPPoE AP; B = Built-in AP; s = LACP striping
R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
M = Mesh node; Y = Mesh Recovery
Total APs:19
Related Commands
Command Description Mode
show ap database-summary
To display a more general summary overview
of the AP registered to a controller, use the
command show ap database-summary.
Enable and Config
modes
Command History
Version Modification
ArubaOS 3.0 Command introduced
ArubaOS 6.2 The usb parameter was introduced
ArubaOS 6.4.2.0 The LACP Striping flag was introduced to indicate of the APis configured
with a LACP striping IP address. See ap-lacp-striping-ip on page 153
The output of show ap database long command displays the service tag of
an AP.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master
controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap database | 942