Release Notes

937 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
VoIP Call Admission Control
Shows if WiFi VoIP Call
Admission Control features
are enabled or disabled.
VoIP Bandwidth based CAC
Shows the maximum
bandwidth that can be
handled by one radio, in
kbps.
VoIP Call Capacity
Show the number of
simultaneous calls that can
be handled by one radio.
VoIP Bandwidth Capacity (kbps)
Shows the maximum
bandwidth that can be
handled by one radio, in
kbps.
VoIP Call Handoff Reservation
Shows the percentage of
call capacity reserved for
mobile VoIP clients on call.
VoIP Send SIP 100 Trying
If enabled, the AP sends SIP
100 - trying messages to a
call originator to indicate
that the call is proceeding.
This is useful when the SIP
invite may be redirected
through a number of
servers before reaching the
controller.
VoIP Disconnect Extra Call
If enabled, the AP
disconnects calls that
exceed the high capacity
threshold by sending a
deauthentication frame.
VOIP TSPEC Enforcement
Shows if validation of TSPEC
requests for call admission
controls is enabled or
disabled.
VOIP TSPEC Enforcement Period
Displays the maximum time
for the station to start a call
after the TSPEC request.
VoIP Drop SIP Invite and send status code (client)
Displays the status code
sent to the client when a SIP
Invite is dropped.
l 480: Temporary
Unavailable
l 486: Busy Here
l 503: Service Unavailable
l none: Don't send SIP
status code