Release Notes

935 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
DoS Prevention
Shows the status of the Dos
Prevention option. If
enabled, virtual APs ignore
deauthentication frames
from clients. This prevents
a successful deauth attack
from being carried out
against the AP. This does
not affect third-party APs.
Station Blacklisting
Shows if the virtual AP has
enabled or disabled
detection of denial of
service (DoS) attacks, such
as ping or SYN floods, that
are not spoofed deauth
attacks.
Blacklist Time
Shows the number of
seconds that a client will be
quarantined from the
network after being
blacklisted.
Authentication Failure Blacklist Time
Shows the time, in seconds,
a client is blocked if it fails
repeated authentication. If
the virtual AP shows a value
of 0, a blacklisted client is
blocked indefinitely.
Fast Roaming
Shows if the AP has enabled
or disabled fast roaming.
Strict Compliance
If enabled, the virtual AP
denies client association
requests if the AP and client
station have no common
rates defined. Some legacy
client stations which are not
fully 802.11-compliant may
not include their configured
rates in their association
requests. Such non-
compliant stations may
have difficulty associating
with APs unless strict
compliance is disabled.
VLAN Mobility
Shows if a virtual AP has
enabled or disabled VLAN
(Layer-2) mobility
Remote-AP Operation
Shows when the virtual AP
operates on a remote AP:
l always—Permanently
enables the virtual AP.
l backup—Enables the
virtual AP if the remote
AP cannot connect to
the controller.