Release Notes

Parameter Description
Drop Broadcast and Multicast
If this feature is enabled on
an AP, it drops all
downstream broadcast or
multicast traffic to increase
battery life.
WEP Key 1
Displays the static WEP key
(1 of 4).
WEP Key 2
Displays the static WEP key
(2 of 4).
WEP Key 3
Displays the static WEP key
(3 of 4).
WEP Key 4
Displays the static WEP key
(4 of 4).
WEP Transmit Key Index
Displays the key index that
specifies which static WEP
key is to be used.
WPA Hexkey
Displays the WPA pre-
shared key (PSK).
WPA Passphrase
Displays the WPA
passphrase with which the
AP generates a pre-shared
key (PSK).
Maximum Transmit Failures
Display the maximum
number of transmission
failures allowed before the
client gives up.
BC/MC Rate Optimization
Shows if the AP has enabled
or disabled scanning of all
active stations currently
associated to that AP to
select the lowest
transmission rate for
broadcast and multicast
frames. This option only
applies to broadcast and
multicast data frames;
802.11 management
frames are transmitted at
the lowest configured rate.
Rate Optimization for delivering EAPOL frames
Shows if the AP has enabled
or disabled rate
optimization for delivering
EAPOL frames.
Strict Spectralink Voice Protocol (SVP)
Shows if strict Spectralink
Voice Protocol (SVP) is
enabled or disabled.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap config | 930