Release Notes

923 | show ap config Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
Scan Interval
This column indicates, in
seconds, how often the AP
will leave its current
channel to scan other
channels in the band if
scanning is enabled
Active Scan
Displays whether or not the
active scan feature is
enabled.
NOTE: This option elicits
more information from
nearby APs, but also
creates additional
management traffic on the
network. Active Scan is
disabled by default, and
should not be enabled
except under the direct
supervision of Dell Support.
Scanning
Shows if scanning is
enabled or disabled for this
AP. If this option is disabled,
the following other options
will also be disabled:
l Multi Band Scan
l Rogue AP Aware
l Voip Aware Scan
l Power Save Scan
Scan Time
The amount of time, in
milliseconds, an AP will drift
out of the current channel
to scan another channel.
The supported range for
this setting is 0-
2,147,483,647 seconds.
Best practices are to
configure a scan time
between 50-200 msec.
VoIP Aware Scan
Shows if VoIP aware
scanning is enabled or
disabled. If you use voice
handsets in the WLAN, VoIP
Aware Scan should be
enabled in the ARM profile
so the AP will not attempt to
scan a different channel if
one of its clients has an
active VoIP call. This option
requires that Scanning is
also enabled.