Release Notes

Parameter Description
Remote-AP bw reservation
Session ACLs with uplink
bandwidth reservation in
kilobits per second. You can
specify up to three session
ACLs to reserve uplink
bandwidth.
Heartbeat DSCP
DSCP value of AP
heartbeats (0-63).
Session ACL
Shows the access control
list (ACL) applied on the
uplink of a remote AP.
Maintenance Mode
Shows if Maintenance
mode is enabled or
disabled. If enabled, APs
stop flooding unnecessary
traps and syslog messages
to network management
systems or network
operations centers when
deploying, maintaining, or
upgrading the network. The
controller still generates
debug syslog messages if
debug logging is enabled.
Remote-AP Local Network Access
Enable or disable local
network access across
VLANs in a Remote-AP.
Radio enable
Shows if the AP’s radio is
enabled or disabled.
Mode
Shows the operating modes
for the AP.
l ap-mode: Device
provides transparent,
secure, high-speed data
communications
between wireless
network devices and the
wired LAN.
l am-mode: Device
behaves as an air
monitor to collect
statistics, monitor
traffic, detect intrusions,
enforce security
policies, balance traffic
load, self-heal coverage
gaps, etc.
l spectrum-mode: Device
behaves as a spectrum
monitor, sending
spectrum analysis data
to the controller.
Spectrum monitors do
not serve clients.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap config | 916