Release Notes

Parameter Description
Double Encrypt
This parameter applies only
to remote APs. Double
encryption is used for traffic
to and from a wireless
client that is connected to a
tunneled SSID. When
enabled, all traffic is re-
encrypted in the IPsec
tunnel. When disabled, the
wireless frame is only
encapsulated inside the
IPsec tunnel.
Native VLAN ID
Native VLAN for bridge
mode virtual APs (frames
on the native VLAN are not
tagged with 802.1q tags).
SAP MTU
Maximum Transmission
Unit (MTU) size, in bytes.
This value describes the
greatest amount of data
that can be transferred in
one physical frame.
Bootstrap threshold
Number of consecutive
missed heartbeats on a
GRE tunnel (heartbeats are
sent once per second on
each tunnel) before an AP
rebootstraps. On the
controller, the GRE tunnel
timeout is 1.5 x bootstrap-
threshold; the tunnel is torn
down after this number of
seconds of inactivity on the
tunnel.
Request Retry Interval
Interval, in seconds,
between the first and
second retries of AP-
generated requests. If the
configured interval is less
than 30 seconds, the
interval for subsequent
retries is increased up to 30
seconds.
Maximum Request Retries
Maximum number of times
to retry AP-generated
requests, including
keepalive messages. After
the maximum number of
retries, the AP either
reboots or tries the IP
address specified by the
backup LMS IP address (if
configured).
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ap config | 914