Release Notes

Parameter Description Range Default
wifi
Wi-Fi devices. 5-65535
seconds
600 sec
xbox
The Microsoft Xbox device uses a frequency
hopping protocol in the 2.4 GHz band. These
devices are classified as Frequency Hopper
(Xbox). Note that this setting is applicable to
2.4GHz spectrum monitor radios only.
5-65535
seconds
25 sec
clone <source>
Make a copy of an existing spectrum profile. 600 sec
no
Remove a spectrum profile or negate a
configured parameter.
Usage Guidelines
The Spectrum Analysis software module provides visibility into RF coverage, allowing you to troubleshoot RF
interference and identify the 802.11 devices on the network. APs that gather spectrum data are called
Spectrum Monitors, or SMs, and reference a spectrum profile that determines the band monitored by that SM
radio. Use this profile to modify default device ageout times for spectrum monitors and hybrid APs using this
profile.
For a list of APs that can be converted into a spectrum monitor or hybrid AP, refer to the Spectrum Analysis
chapter of the Dell Networking W-Dell Networking W-Series ArubaOS 6.4.x User Guide.
Example
The following command creates the spectrum profile spectrum2.
(host) (config) #rf spectrum-profile spectrum2
Related Commands
show rf spectrum-profile
Command History
Release Modification
ArubaOS 6.0 Command introduced
ArubaOS 6.2 The spectrum-band parameter was deprecated.
The following default ageout times were changed:
l cordless-fh-base default timeout is 240 seconds (was 25 sect in previous releases)
l cordless-fh-network default timeout is 60 sect (was 10 sect in previous releases)
l generic-interferer default timeout is 30 sect (was 25 sect in previous releases)
l video default timeout is 60 sect (was 10 sect in previous releases)
Command Information
Platforms Licensing Command Mode
All platforms RF Protect license Config mode on master and local
controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide rf spectrum-profile | 694