Release Notes

681 | rf dot11g-radio-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
balancing domain isalso
defined, AP radios belonging to
the same spectrum load
balancing domain will be
considered part of the same RF
neighborhood for load
balancing, and will not
recognize RF neighborhoods
defined by the ARM feature.
spectrum-load-balancing
The Spectrum Load Balancing
feature helps optimize network
resources by balancing clients
across channels, regardless of
whether the AP or the controller is
responding to the wireless clients'
probe requests.
If enabled, the controller compares
whether or not an AP has more
clients than its neighboring APs on
other channels. If an AP’s client
load is at or over a predetermined
threshold as compared to its
immediate neighbors, or if a
neighboring Dell AP on another
channel does not have any clients,
load balancing will be enabled on
that AP. This feature is disabled by
default.
— disabled
spectrum-monitoring
Issue this command to turn APs in
ap-mode into a hybrid AP. An AP in
hybrid AP mode will continue to
serve clients as an access point
while it scans and analyzes
spectrum analysis data for a single
radio channel.
For further details on using hybrid
APs and spectrum monitors to
examine the radio frequency (RF)
environment in which the Wi-Fi
network is operating, refer to the
Spectrum Analysis chapter of the
Dell Networking W-Series ArubaOS
User Guide.
For a list of APs that can be
converted into a spectrum monitor
or hybrid AP, refer to the Spectrum
Analysis chapter of the Dell
Networking W-Dell Networking W-
Series ArubaOS 6.4.x User Guide.
— default
spectrum-profile <profile>
Specify the rf spectrum profile
used by hybrid APs and spectrum
monitors. This profile sets the
spectrum band and device ageout
times used by a spectrum monitor
or hybrid AP radio. For details, see
rf spectrum-profile on page 692.
— default