Release Notes

Parameter Description Range Default
For a list of APs that can be
converted into a spectrum monitor
or hybrid AP, refer to the Spectrum
Analysis chapter of the Dell
Networking W-Dell Networking W-
Series ArubaOS 6.4.x User Guide.
no
Negates any configured
parameter.
— —
radio-enable
Enables or disables radio
configuration.
— enabled
slb-mode channel|radio
SLB Mode allows control over how
to balance clients. Select one of the
following options:
l channel: Channel-based load-
balancing balances clients
across channels. This is the
default load-balancing mode
l radio: Radio-based load-
balancing balances clients
across APs
channel
slb-threshold
If the spectrum load balancing
feature is enabled, this parameter
controls the percentage difference
between number of clients on a
channel channel that triggers load
balancing. The default value is
20%, meaning that spectrum load
balancing is activated when there
are 20% more clients on one
channel than on another channel
used by the AP radio.
1-100% 20%
slb-update-interval <secs>
Specify how often spectrum load
balancing calculations are made
(in seconds). The default value is
30 seconds.
1-
2147483647
seconds
30 seconds
spectrum-load-bal-domain
Define a spectrum load balancing
domain to manually create RF
neighborhoods.
Use this option to create RF
neighborhood information for
networks that have disabled
Adaptive Radio Management
(ARM) scanning and channel
assignment.
l If spectrum load balancing is
enabled in a 802.11g radio
profile but the spectrum load
balancing domain is not
defined, ArubaOS uses the ARM
feature to calculate RF
neighborhoods.
l If spectrum load balancing is
enabled in a 802.11g radio
profile and a spectrum load
— —
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide rf dot11g-radio-profile | 680