Release Notes

677 | rf dot11g-radio-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
l Dynamic mode: In this mode,
the Clear Channel Assessment
(CCA) thresholds are based on
channel loads, and take into
account the location of the
associated clients. When you
set the Channel Reuse This
feature is automatically
enabled when the wireless
medium around the AP is busy
greater than half the time.
When this mode is enabled, the
CCA threshold adjusts to
accommodate transmissions
between the AP its most distant
associated client.
l Disable mode: This mode does
not support the tuning of the
CCA Detect Threshold.
channel-reuse-threshold
RX Sensitivity Tuning Based
Channel Reuse Threshold, in -dBm.
If the Rx Sensitivity Tuning Based
Channel reuse feature is set to
static mode, this parameter
manually sets the AP’s Rx
sensitivity threshold (in -dBm). The
AP will filter out and ignore weak
signals that are below the channel
threshold signal strength.
If the value is set to zero, the
feature will automatically
determine an appropriate
threshold.
depends on
regulatory
domain
—
disable-arm-wids-function
Disables Adaptive Radio
Management (ARM) and Wireless
IDS functions. These can be
disabled if a small increase in
packet processing performance is
desired. If a radio is configured to
operate in Air Monitor mode, then
these functions are always enabled
irrespective of this option.
CAUTION: Use carefully, since this
effectively disables ARM and WIDS
1-16 4
dot11b-protection
Enable or disable protection for
802.11b clients. This parameter is
enabled by default. Disabling this
feature may improve performance
if there are no 802.11b clients on
the WLAN.
— enabled