Release Notes

659 | rf arm-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
ota-updates
The ota-updates option allows an AP to
get information about its
RFenvironment from its neighbors, even
the AP cannot scan. If this feature is
enabled, when an AP on the network
scans a foreign (non-home) channel, it
sends other APs an Over-the-Air (OTA)
update in an 802.11 management frame
that contains information about the
scanning AP's home channel, the
current transmission EIRP value of its
home channel, and one-hop neighbors
seen by that AP.
Default: enabled
— enabled
ps-aware-scan
When enabled, the AP will not scan if
Power Save is active.
— disabled
rogue-ap-aware
When enabled, the AP will try to contain
off-channel rogue APs.
— disabled
scan-interval
If scanning is enabled, the scan interval
defines how often the AP will leave its cur-
rent channel to scan other channels in
the band. Off-channel scanning can
impact client performance. Typically, the
shorter the scan interval, the higher the
impact on performance. If you are deploy-
ing a large number of new APs on the net-
work, you may want to lower the Scan
Interval to help those APs find their
optimal settings more quickly. Raise the
Scan Interval back to its default setting
after the APs are functioning as desired.
Recommended Values: 0-30 seconds
0-2,147,483,
647 seconds
10seconds
scan-mode
Select the scan mode for the AP:
l all-reg-domain: The AP scans
channels within all regulatory
domains. This is the default setting.
l reg-domain:Limit the AP scans to
just the regulatory domain for that
AP.
—
all-reg-
domain
scanning
The Scanning checkbox enables or
disables AP scanning across multiple
channels. Disabling this option also
disables the following scanning
features:
l Multi Band Scan
l Rogue AP Aware
l Voip Aware Scan
l Power Save Scan
Do not disable Scanning unless you
want to disable ARM and manually
configure AP channel and transmission
power.
— enabled