Release Notes

63 | aaa authentication via connection-pro-
file
Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Default
ikev2-proto
Enable this to use IKEv2
protocol to establish VIA
sessions.
Disabled
ikev2auth
Use this option to set the
IKEv2 authentication
method. By default user
certificate is used for
authentication. The other
supported methods are
EAP-MSCHAPv2, EAP-TLS.
The EAP authentication is
done on an external
RADIUS server.
User
Certificates
ipsec-cryptomap
List of IPsec crypto maps
that the VIA client uses to
connect to the controller.
These IPsec Crypto Maps
are configured in the CLI
using the crypto-local
ipsec-map <ipsec-map-
name> command.
—
map <map>
—
number <number>
—
ipsecv2-cryptomap
List of IPSec V2 crypto
maps that the VIA client
uses to connect to the
controller.
—
lockdown-all-settings
Allows you to lockdown all
user configured settings.
Disabled.
max-reconnect-attempts <max-reconnect-attempts>
The maximum number of
re-connection attempts by
the VIA client due to
authentication failures.
3
max-timeout value <value>
The maximum time
(minutes) allowed before
the VIA session is
disconnected.
1440 min
minimized
Use this option to keep the
VIA client on a Microsoft
WIndows operating system
minimized to system tray.
—
save-passwords
Enable or disable users to
save passwords entered in
VIA.
Enabled
server
Configure VIAservers.
split-tunneling
Enable or disable split
tunneling.
l If enabled, all traffic to
the VIA tunneled
networks will go
through the controller
off