Release Notes

515 | local-userdb-remote-node (deprecated) Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
local-userdb-remote-node (deprecated)
localuserdb
local-userdb-remote-node add mac-address <mac-address> remote-node-profile
<remote-node-profile>
del mac-address <mac-address>
Description
This command adds a Remote Node to the Remote Node whitelist. You can also delete the whitelist entry using
this command.
Syntax
Parameter Description Range Default
mac-address <mac-address>
MAC address of the
Remote Node in colon-
separated six-octet format.
— —
remote-node-profile <remote-node-profile>
The Remote Node
configuration profile to be
assigned to that Remote
Node.
1 – 64
characters
—
Usage Guidelines
A Remote Node-master can only assign a configuration profile to a Remote Node in its Remote Node whitelist.
To assign a different configuration to an unprovisioned Remote Node, you must delete the whitelist entry and
create a new Remote Node whitelist entry with the correct Remote Node configuration profile. A remote-node
profile has to be validated before it is configured and pushed to a Remote Node.
Example
This example adds the Remote Node profile named Location-1 to the Remote Node whitelist.
(remote-node-master) #local-userdb-remote-node add mac-address 00:16:CF:AF:3E:E1 remote-node-
profile Location_1
This example removes a Remote Node from the Remote Node whitelist.
(remote-node-master)(config) #local-userdb-remote-node del mac-address 00:16:CF:AF:3E:E1
Related Commands
Command Description Mode
remote-node-localip (deprecated)
Configures security for all
Remote Node and Remote
Controller control traffic
Config modes
remote-node-masterip (deprecated)
Configures security for the
Remote Node master IP
address.
Config mode