Release Notes

Parameter Description Range Default
l If you associate a
Source Interface
(by entering a
VLAN number) with
a configured
server, then the
source IP address
of the packet will
be that interface’s
IP address.
l If you do not
associate the
Source Interface
with a configured
server (leave the
field blank), then
the IP address of
the global Source
Interface will be
used.
l If you want to
configure an IPv6
address for the
Source Interface,
specify the IPv6
address for the
ip6addr
parameter.
timeout <seconds>
Maximum time, in
seconds, that the
controller waits before
timing out the request
and resending it.
1-30 5
seconds
use-ip-for-calling-station
Use an IP address
instead of a MAC
address for calling sta-
tion IDs. This option is
disabled by default.
— disabled
use-md5
Use MD5 hash of
cleartext password.
— disabled
Usage Guidelines
You configure a server before you can add it to one or more server groups. You create a server group for a
specific type of authentication (see aaa server-group on page 102).
Example
The following command configures and enables a RADIUS server:
aaa authentication-server radius radius1
host 10.1.1.244
key qwERtyuIOp
enable
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide aaa authentication-server radius | 46