Release Notes

45 | aaa authentication-server radius Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
nas-ip <ip-addr>
NAS IP address to
send in RADIUS
packets.
You can configure a
“global” NAS IP
address that the
controller uses for
communications with
all RADIUS servers. If
you do not configure a
server-specific NAS IP,
the global NAS IP is
used. To set the global
NAS IP, enter the ip
radius nas-ip <ipaddr>
command.
— —
nas-ip6 <ipv6-address>
NAS IPv6 address to
send in RADIUS
packets.
You can configure a
“global” NAS IPv6
address that the
controller uses for
communications with
all RADIUS servers. If
you do not configure a
server-specific NAS
IPv6, the global NAS
IPv6 is used. To set the
global NAS IPv6, enter
the ipv6 radius
nas-ip6 <ipv6-
address> command.
no
Negates any
configured parameter.
— —
retransmit <number>
Maximum number of
retries sent to the
server by the
controller before the
server is marked as
down.
0-3 3
service-type-framed-user
Send the service-type
as FRAMED-USER
instead of LOGIN-
USER. This option is
disabled by default
— disabled
source-interface vlan <vlan> ip6addr <ipv6addr>
This option associates
a VLAN interface with
the RADIUS server to
allow the server-
specific source
interface to override
the global
configuration.
— —