Release Notes

427 | interface vlan Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
l managed-config-
flag—Enables hosts to
use DHCP server for
stateful address
autoconfiguration
l mtu—Configures
maximum
transmission unit for
RA
l other-config-flag—
Enables hosts to use
DHCP server for other
non-address stateful
autoconfiguration
l preference—
Configures a router
preference
l prefix—Configures
IPv6 RA prefix
l reachable-time—
configures neighbor
discovery reachable
time
l retransmit-time—
configures neighbor
discovery retransmit
time
no
Negates any configured
parameter.
— —
mtu
MTU setting for the VLAN. 1024-
1500
—
multimode-auth
MultiMode Authentication
Support on VLAN
— —
operstate up
Set the state of the
interface to be up.
— —
option-82 mac
Allows a DHCP relay agent
to insert circuit specific
information into a request
that is being forwarded to
a DHCP server.
The controller, when
acting as a DHCP relay
agent, needs to be able to
insert information about
the AP and SSID through
which a client is
connecting into the DHCP
request.
Many service providers
use this mechanism to
make access control
decisions. You can include
only the MAC address or
MAC address and ESSID.
— —