Release Notes

Dell Networking W-Series ArubaOS 6.4.x| Reference Guide The ArubaOS Command-Line Interface | 3
The ArubaOS Command-Line Interface
The Dell Networking W-Series ArubaOS 6.4.x command-line interface (CLI) allows you to configure and manage
Dell controllers. The CLI is accessible from a local console connected to the serial port on the controllers or
through a Telnet or Secure Shell (SSH) session from a remote management console or workstation.
Telnet access is disabled by default. To enable Telnet access, enter the telnet CLI command from a serial connection
or an SSH session, or in the WebUI navigate to the Configuration > Management > General page.
What's New In ArubaOS 6.4.x
New Commands
The following commands are introduced in ArubaOS 6.4.2.0:
Command Description
ap-lacp-striping-ip This command defines an AP LACP LMS map information profile that
maps a GRE striping IP address to an existing LMS-IP address, allowing
W-AP220 Series and W-AP270 Series AP to form a tunnel to a backup
controller in the event of a controller failover.
kernel coredump This command enables the controller to capture the snapshot of the
working memory of the control plane when the control plane has
terminated abnormally.
show web-cc This command display information about web content (web-cc)
classification settings, category and reputation types, classification
statistics and bandwidth contracts.
web-cc This command defines global bandwidth contracts for HTTP traffic
matching a predefined web content category or reputation type.
Modified Commands
The following commands are modified in ArubaOS 6.4.2.0:
Command Description
ap-rename The service-tag parameter is introduced to identify an AP with its
service tag.
ap-regroup The service-tag parameter is introduced to identify an AP with its
service tag.
ap system-profile l The gre-striping-ip parameter is deprecated. GRE striping IP
settings are defined using the ap-lacp-striping-ip command.
l The system-message-frequency parameter now accepts a value
in the range of 1-3600 seconds.
clear l The web-cc cache and web-cc stats parameters are introduced, to
clear the web content classification category cache and statistics.