Release Notes

wlan tsm-req-profile
wlan tsm-req-profile <profle-name>
bin0-range <bin0-range>
clone
dur-mandatory
measure-duration <measure-duration>
no
num-repeats <num-repeats>
random-interval <random-interval>
request-mode {normal | triggered}
traffic-id <traffic-id>
Description
This command configures a TSM Report Request Profile.
Syntax
Parameter Description Range Default
<profile-name>
Name of this instance of the profile.
The name must be 1-63 characters.
— “default”
bin0-range <bin0-range>
This value is used to set the 'Bin 0
Range' field in the Transmit
Stream/Category Measurement
Request frame. Bin 0 Range indicates
the delay range of the first bin (Bin 0)
of the Transmit Delay Histogram,
expressed in units of TUs.
0- 255 6
clone <source>
Creates a copy of the Transmit
Stream Measurement Request Report
Request Profile.
<source> is the name of an existing
TSM Profile from which parameter
values are copied.
— —
dur-mandatory
This parameter is used to set the
"Duration Mandatory" bit of the
Measurement Request Mode field of
the Transmit Stream/Category
Measurement Request frame.
—
Enabled
measure-duration <measure-duration>
This parameter is used to set the
Measurement Duration field in the
Transmit Stream/Category
Measurement Request frame. The
Measurement Duration is set to the
duration of the requested
measurement. It is expressed in units
of TUs. When the request mode for
the Transmit Stream/Category
Measurement Request frame is set to
"triggered", the Measurement
Duration field should be set to 0.
0-
65535
9776
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide wlan tsm-req-profile | 2082