Release Notes

2037 | wlan hotspot anqp-nai-realm-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
non-eap-mschapv2
Non-EAP Method - MSCHAPv2
non-eap-pap
Non-EAP Method - PAP
non-eap-rsvd
Non-EAP Method - Reserved for future use
reserved
Reserved for future use.
nai-realm-eap-method
Select one of the options below to identify the
EAP authentication method supported by the
hotspot realm.
crypto-card
Crypto card authentication
eap-aka
EAP for UMTS Authentication and Key
Agreement
eap-sim
EAP for GSM Subscriber Identity Modules
eap-tls
EAP-Transport Layer Security
eap-ttls
EAP-Tunneled Transport Layer Security
generic-token-card
EAP Generic Token Card (EAP-GTC)
identity
EAP Identity type
notification
The hotspot realm uses EAP Notification
messages for authentication.
one-time-password
Authentication with a single-use password.
peap
Protected Extensible Authentication Protocol
peap-mschapv2
Protected Extensible Authentication Protocol with
Microsoft Challenge Handshake Authentication
Protocol version 2
nai-realm-encoding <0-255>
Issue this command if the NAI realm named
defined by nai-realm-name <nai-realm-name> is
a UTF-8 formatted character string that is not
formatted in accordance with IETF RFC 4282.
nai-realm-name <nai-realm-name>
Name of the NAI realm. The realm name is often
the domain name of the service provider.
no
Negate or remove any existing parameter
Usage Guidelines
An AP’s NAI Realm profile identifies and describes a NAI realm accessible using the AP, and the method that this
NAI realm uses for authentication. These settings configured in this profile determine the NAI realm elements
that are included as part of a GAS Response frame.
Values configured in this profile will not be sent to clients unless you:
1. Associate the ANQP NAI Realm profile with an ANQP advertisement profile. (wlan hotspot advertisement
profile <profile-name>anqp-nai-realm-profile <profile-name>)