Release Notes

2011 | wlan bcn-rpt-req-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter
Description Range Default
measure-dur-mandatory
This value is used to set the
"Duration Mandatory" bit of the
Measurement Request Mode field
of the Beacon Report Request
frame.
— Disabled
measure-duration <measure-duration>
This value is used to set the
Measurement Duration field in the
Beacon Report Request frame.
The Measurement Duration is set
to the duration of the requested
measurement. It is expressed in
units of TUs.
0 – 65535 0
measure-mode
Indicates the mode used for the
measurement. The valid
measurement modes are:
active-all-ch
active-ch-rpt
beacon-table
passive
—
beacon-
table
no
Negates any configured
parameter.
— —
random-interval <random-interval>
This value is used to set the
Randomization Interval field in the
Beacon Report Request frame.
The Randomization Interval is
used to specify the desired
maximum random delay in the
measurement start time. It is
expressed in units of TUs (Time
Units). A Randomization Interval of
0 in a measurement request
indicates that no random delay is
to be used.
0 – 65535 0
reg-class {1|12}
This option is used to specify the
Regulatory Class field in the
Beacon Report Request frame.
For
802.11b/g
bands,
12. For
802.11a,
use 1
—
request-info <request-info>
This option is used to indicate the
contents of the Request
Information IE that could be
present in the Beacon Report
Request frame. The Request
Information IE is present for all
Measurement Modes except the
'Beacon Table' mode. It consists of
a list of Element IDs that should be
included by the client in the
response frame.
Any valid
element
ID in the
x/y/z
format.
For
example,
0/21/22.
—