Release Notes

1981 | vrrp Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
sub
Decreases the priority of the
VRRP instance by the specified
amount. When the interface
comes up again, the value is
restored to the previous priority
level.
The combined priority and
tracking vales cannot exceed
255.
If the priority value exceeds 255,
the controller displays an error
message.
0-255 —
tracking master-up-time duration
Monitors how long the controller
has been master for the VRRP
instance.
0-1440
minutes
—
tracking master-up-time add
Instructs the controller to add the
specified value to the existing
priority level.
The combined priority and
tracking values cannot exceed
255.
If the priority value exceeds 255,
the controller displays an error
message similar to the following:
Error: Vrrp 30 priority + tracking
value exceeds 255
0-255 —
tracking vlan
Configures VRRP tracking based
on VLAN state transitions.
You can track a combined
maximum of 16 VLAN and Layer-
2 interfaces.
— —
sub
Decreases the priority of the
VRRP instance by the specified
amount. When the VLAN comes
up again, the value is restored to
the previous priority level.
The combined priority and
tracking values cannot exceed
255.
If the priority value exceeds 255,
the controller displays an error
message.
0-255 —
vrrp-master-
state
Specifies the VRID to use for
tracking the state of the VRRP
master controller.
1-255 —
vrrp-master-
state add
Instructs the controller to add the
specified value to the existing
priority level.
The combined priority and
tracking values cannot exceed
255.
If the priority value exceeds 255,
the controller displays an error
message similar to the following:
0-255 —