Release Notes

Parameter Description Range Default
hash
Specifies the HASH algorithm, ether SHA or
MD5.
md5 | sha sha
lifetime
Specifies how long an IKE security association
lasts, in seconds.
300-86400 28800
seconds
ipsec
Configures IPsec. This configuration must
match the IPsec parameters configured with the
crypto dynamic-map and crypto ipsec
commands on the controller.
encryption
Specifies the encryption type for IPsec, either
DES or 3DES.
esp-3des |
esp-des
esp-3des
hash
Specifies the hash algorithm used by IPsec,
either MD5 or SHA.
esp-md5-
hmac |
esp-
sha- hmac
esp-sha-
hmac
lifetime
Specifies how long an IPsec security association
lasts, in seconds.
300-86400 7200
seconds
pfs
Specifies the IPsec Perfect Forward Secrecy
(PFS) mode, either group 1 or group 2.
group1 |
group2
group2
no
Negates any configured parameter.
ppp authentication
Enables the protocols for PPP authentication.
This list should match the L2TP or PPTP
configuration configured with the vpdn
command on the controller.
cache-securid
The controller caches Secure ID tokens so that
the user does not need to reauthenticate each
time a network connection is lost.
disabled
chap
Use CHAP with PPP authentication. enabled
mschap
Use MSCHAP with PPP authentication. enabled
mschapv2
Use MSCHAPv2 with PPP authentication. enabled
pap
Use PAP with PPP authentication. enabled
Usage Guidelines
A VPN dialer is a Windows application that configures a Windows client for use with the VPN services in the
controller. When VPN is used as an access method, a user can login using captive portal and download a VPN
dialer. You can customize a VPN dialer for a user role configured with the user-role command. After the user
authenticates via captive portal, a link appears to allow download of the VPN dialer if a dialer is configured for
the user role.
Example
The following command configures a VPN dialer:
(host) (config) #vpn-dialer default-dialer
ike authentication pre-share f00xYz123BcA
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide vpn-dialer | 1976