Release Notes

193 | ap system-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Syntax
Parameter Description Range Default
<profile>
Name of this instance of the profile.
The name must be 1-63 characters.
— “default”
aeroscout-rtls-
server
Enables the AP to send RFID tag
information to an AeroScout real-time
asset location (RTLS) server.
RTLS station reporting includes
information for APs and the clients that
the AP has detected. If you include the
include-unassoc-sta parameter, the
station reports will also include
information about clients not
associated to any AP. By default,
unassociated clients are not included
in station reports.
— —
am-scan-rf-band
Scanning band for multiple RF radios a, g, all all
a
Set the scanning band to 802.11a only — all
g
Set the scanning band to 802.11g only — all
all
Set the scanning band to apply to all
bands
— all
ip-or-dns
IP address or the DNS of the
AeroScout server to which location
reports are sent.
— —
port
Port number on the AeroScout server
to which location reports are sent.
— —
bkup-lms-ip
In multi-controller networks, specifies
the IP address of a backup to the IP
address specified with the lms-ip
parameter.
— —
bkup-lms-ipv6
In multi-controller ipv6 networks,
specifies the IPv6 address of a backup
to the IPv6 address specified with the
lms-ipv6 parameter.
— —
bootstrap-
threshold
Number of consecutive missed
heartbeats on a GRE tunnel
(heartbeats are sent once per second
on each tunnel) before an AP
rebootstraps. On the controller, the
GRE tunnel timeout is 1.5 x bootstrap-
threshold; the tunnel is torn down after
this number of seconds of inactivity on
the tunnel.
1-65535 8
clone
Name of an existing AP system profile
from which parameter values are
copied.
— —