Release Notes

Parameter Description
Deny_Broadcast Probes
When a client sends a broadcast probe
request frame to search for all available
SSIDs, this option controls whether or not the
system responds for this SSID. When
enabled, no response is sent and clients have
to know the SSID in order to associate to the
SSID. When disabled, a probe response
frame is sent for this SSID
Local Probe Response
Shows if the profile enables or disables local
probe response on the AP. If this option is
enabled, the AP is responsible for sending
802.11 probe responses to wireless clients’
probe requests. If this option is disabled, then
the controller sends the 802.11 probe
responses
Disable Probe Retry
Shows if the profile enables or disables
battery MAC level retries for probe response
frames.
Battery Boost
If enabled, this feature converts multicast
traffic to unicast before delivery to the client,
thus allowing you to set a longer DTIM
interval.
WEP Key 1
Displays the Static WEP key associated with
this key index.
WEP Key 2
Displays the Static WEP key associated with
this key index.
WEP Key 3
Displays the Static WEP key associated with
this key index.
WEP Key 4
Displays the Static WEP key associated with
this key index.
WEP Transmit Key Index
Show the key index that specifies which static
WEP key is to be used
WPA Hexkey
WPA pre-shared key (PSK).
WPA Passphrase
WPA passphrase used to generate a pre-
shared key (PSK).
Maximum Transmit Failures
Maximum transmission failures allowed
before the client gives up.
EDCA Parameters Station profile
Name of the enhanced distributed channel
access (EDCA) Station profile that applies to
this SSID.
EDCA Parameters AP profile
Name of the enhanced distributed channel
access (EDCA) AP profile that applies to this
SSID.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show wlan ssid-profile | 1866