Release Notes

175 | ap provisioning-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Default Range
usb-user
The PPP username provided by the cellular service
provider
— —
Usage Guidelines
The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These
settings can be saved or assigned to an AP group via the command ap-group <group> provisioning-profile
<profile>.
In order to enable cellular uplink for a remote AP (RAP), the RAP must have the device driver for the USB data
card and the correct configuration parameters. ArubaOS includes device drivers for the most common
hardware types, but you can use the usb commands in this profile to configure a RAP to recognize and use an
unknown USB modem type.
Related Commands
Command Description
provision-ap Change provisioning parameters for an individual AP. This command does
not save the provisioning parameters settings in a reusable profile.
Example
The following commands create a provisioning profile named profile_branch, in which the cellular link is the
primary uplink because it has a higher priority than the Ethernet link:
(host) (config) #ap provision-profile profile_branch
link-priority-cellular 2
link-priority-ethernet 1
usb-type acm
usb-modeswitch "-v 0x106c -p 0x3b06 -V 0x106c -P 0x3717 -M
5534243b82e238c24000000800008ff020000000000000000000000000000"