Release Notes

171 | ap mesh-radio-profile Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Example
The following command creates a mesh radio profile named “radio2” and associates a mesh high-throughput
profile named meshHT1:
(host) (config) #ap mesh-radio-profile radio2
mesh-ht-ssid-profile meshHT1
Related Commands
To view a complete list of mesh radio profiles and their status, use the following command:
(host) (config) #show ap mesh-radio-profile
To view the settings of a specific mesh radio profile, use the following command:
(host) (config) #show ap mesh-radio-profile <name>
Command History
Release Modification
ArubaOS 3.2 Command introduced.
ArubaOS 3.2.0.x, 3.3.1.x The tx-power default increased from 14 to 30 dBm.
ArubaOS 3.3 The heartbeat-threshold default increased from 5 to 10 heartbeat
messages.
ArubaOS 3.3.2 The mesh-mcast-opt parameter was introduced.
ArubaOS 3.4 The mesh-ht-ssid-profile parameter was introduced
The 11a-portal-channel, 11g-portal-channel, beacon-period and tx-
power parameters were deprecated. These settings can now be configured
via the
rf dot11a-radio-profile and rf dot11g-radio-profile commands.
ArubaOS 6.1 The eapol-rate-opt parameter was introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config mode on master controllers