Release Notes

show tunnel-group
show tunnel-group <tunnel-group-name>
Description
Displays the operational status of the tunnel-groups configured on the controller.
Syntax
Parameter Description
<tunnel-group-name>
Displays the operational status of the specified tunnel-group.
Example
The output of this command shows the status of the configured tunnel-groups:
(host) (config) #show tunnel-group
Tunnel-Group Table Entries
--------------------------
Tunnel Group Tunnel Group Id Preemptive Failover Active Tunnel Id Tunnel Members
------------ --------------- -------------------- ---------------- --------------
tgroup1 16385 enabled 0 10 20
tgroup2 16387 enabled 40 20 40 10
tgroup3 16386 enabled 0 20
The output of the following command shows the status of the specified tunnel-group:
(host) (config-tunnel-group)#show tunnel-group tgroup1
Tunnel-Group Table Entries
--------------------------
Tunnel Group Tunnel Group Id Preemptive Failover Active Tunnel Id Tunnel Members
------------ --------------- -------------------- ---------------- --------------
tgroup1 16385 enabled 10 20
Command History
Release Modification
ArubaOS 6.3 Command introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or
local controllers
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show tunnel-group | 1708