Release Notes

Parameter Description
tunnel
Show the Mobile Tunnel Table for IPIP Tunnels.
visitor
Display a list of mobile nodes visiting a foreign
agent.
[<host-ip>]
Filter the Foreign Agent Visitor list to display data
for a specific host IPv4 address.
[<host-ipv6>]
Filter the Foreign Agent Visitor list to display data
for a specific host IPv6 address.
[<host-macaddr>]
Filter the Foreign Agent Visitor list to display data
for a specific host MAC address.
[brief]
Limit the output of this command to show just two
lines of data.
Examples
The example below lists mobility domains configured on the controller, and shows information for any subnets
defined on these domains.
(host) #show ip mobile domain
Mobility Domains:, 2 domain(s)
------------------------------
Domain name default
Home Agent Table, 0 subnet(s)
Domain name newdomain
Home Agent Table, 2 subnet(s)
subnet mask VlanId Home Agent Description
--------------- --------------- ------ --------------- -----------------------
10.2.124.76 255.255.255.255 1 10.4.62.2 Corporate mobility entry
172.21.5.50 255.255.255.255 1 10.4.62.2 Reserved entries
The output of this command includes the following parameters:
Parameter Description
Home Agent
IP address of the home agent or mobility agent.
Description
Description of the HAT entry.
Use the show ip mobile host command to track mobile users.
(host) # show ip mobile host
Mobile Host List, 1 host(s)
---------------------------
9c:b7:0d:3f:a6:dd 10.16.23.219 mob1
IPv4: 10.16.23.219
IPv6: fe80::826:aa9a:fe35:53e0
2004:deed::34
Roaming Status: Home Switch/Home VLAN, Service time 0 days 01:34:19
Home VLAN 623 on network 10.16.23.0/24
DHCP lease for PC at Sun Dec 23 20:32:00 2012 for 86400 secs from 10.16.28.1
The output of this command includes the following parameters:
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide show ip mobile | 1408