Release Notes

129 | airgroup Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Example
Access the controller’s command-line interface and use the following command to enable the AirGroup Global
Setting:
(host) (config) # airgroup server-refresh <mac> MAC-address
(host) (config) # airgroup test-server <name> <mac> MAC-address
(host) (config) # airgroup enable
(host) (config) # airgroup dlna enable
(host) (config) # airgroup mdns enable
(host) (config) # airgroup cppm-server enforce-registration
(host) (config) # airgroup query-interval 10
(host) (config) # airgroup location-discovery enable
(host) (config) # airgroup active-wireless-discovery enable
Use the following command to enable the allowall service:
(host) (config) #airgroup service allowall enable
Use the following command to enable AirGroup access to devices in a specific VLAN:
(host) (config) #airgroup vlan 5 disallow
Related Commands
Command Description
show airgroup This command displays AirGroup global settings, domain, active-domain,
and more AirGroup configuration information on the controller.
Command History
Release
Modification
ArubaOS 6.3 Command introduced.
ArubaOS 6.4 The static <mdns-record> parameter was introduced.
ArubaOS 6.4.1
l The Chromecast service was renamed to DIAL.
l The googlecast service was introduced.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system The following commands are available
only in Enable mode:
l (config) # airgroup server-refresh
<mac> MAC-address
l (config) # airgroup test-server
<name> <mac> MAC-address
Configuration mode on master and local
controllers
NOTE: Few configuration parameters
are available on the master controller
only. For more information, see Syntax
table description.