Release Notes

127 | airgroup Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description Range Default
active-wireless-
discovery
{disable | enable}
If enabled, controller actively
sends refresh requests to discover
wireless servers. If disabled, the
controller sends refresh requests
to wired AirGroup servers only.
This parameter is available on the
master controller only. The master
controller pushes this AirGroup
configuration to all the applicable
local controllers.
— disabled
cppm-server aaa
no
rfc-3576-server
rfc3576_udp_port
server-dead-time
server-group
Configure the following settings in
the AirGroup AAA profile:
no: Delete command.
rfc-3576-server <rfc3576_
server>: Configure RFC 3576
server IP address.
rfc3576_udp_port <rfc3576_udp_
port>: Configure the UDP port
number.
server-dead-time <server-dead-
time>: Server dead time in
minutes.
server-group <server-group>:
Name of the server group.
This parameter is available on the
master controller only. The master
controller pushes this AirGroup
configuration to all the applicable
local controllers.
— server-dead-time: 0
cppm-server
enforce-registration
query-interval <1..24>
enforce-registration: Use this
parameter to force AirGroup
servers to register with CPPM.
query-interval: Configures the
CPPM query interval in the
controller.
This parameter is available on the
master controller only. The master
controller pushes this AirGroup
configuration to all the applicable
local controllers.
query-
interval:
1 — 24
hours.
—
disable
Disable AirGroup on the controller. — —
dlna {disable | enable}
Enable AirGroup dlna support on
the controller.
— disabled
domain <STRING>
Configure AirGroup domain.
This parameter is available on the
master controller only. The master
controller pushes this AirGroup
configuration to all the applicable
local controllers.
— —
enable
Enable AirGroup on the controller. — —