Release Notes

1255 | show datapath Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Parameter Description
station
Displays theIPv6 station membership.
lag table
Displays contents of the datapath link aggregation group (LAG) or
port channel table.
message-queue counters
Displays statistics of messages received by a CPU from other
datapath CPUs (only CPUs that receive messages and non-zero
statistics are shown).
maintenance counters
Displays datapath maintenance statistics.
mobility
Displays datapath IP mobility information.
discovery-table
Displays the discovery count table that is used to keep track of per
client home agent discovery.
home-agent-table
Displays the datapath HA table information.
mcast-table
Displays the mobility multicast-group table that is used to flood the
multicast RA traffic to the roamed clients.
stats
Displays the statistics of the datapath mobility.
nat
Displays the contents of the datapath NAT entries table. It displays
NAT pools as configured in the datapath. Statistics include pool, SITP
start, SIP end and DIP.
network ingress
Displays ingress queue counters.
ap-name <ap-name>
Name of AP.
counters
Nat counters.
ip-addr <ip-address>
IP address of the AP.
papi
Displays datapath papi counters including: SUM/CPU, addr,
description, and value.
port
Displays the datapath port table information. This includes the port
number, PVID, Ingress ACL, Egress ACL, Session ACL, and the
following flags:
l Q: trunk
l T: trusted
l B: blocked by the Spanning Tree protocol
l L: LSG
l M: tunneled node
l X: xSec
l Z: QinQ
link-event
Displays port link up and link down event counters.
monitor
Displays the monitor port configuration.
stats <slot/port>
Displays the physical port statistics.
status <slot/port>
Displays the physical port status.
trusted
Displays the trusted ports.