Release Notes

1103 | show ap provisioning Dell Networking W-Series ArubaOS 6.4.x| Reference Guide
Command History
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.2 Introduced support for mesh parameters, additional antenna parameters,
and AP location parameters.
ArubaOS 3.4 Introduced support for the following parameters:
l Installation
l Mesh SAE
l USB User Name
l USB Password
l USB Device Type
l USB Device Identifier
l USB Dial String
l USB Initialization String
l USB TTY device path
ArubaOS 5.0 The mesh-sae parameter no longer displays the sae-default setting if the
parameter is disabled. Only the sae-disable option indicates that this
parameter is currently in its default disabled state.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on the controller
where the AP is terminating.