Release Notes

Command Description
show ipv6 mld config The ssm-range parameter is introduced.
show ipv6 mld group The mode and age parameters are introduced.
show ntp peer The IPv6 parameter is introduced.
show ntp servers Flags indicating the status of the server, are introduced.
show ntp status The following parameters are introduced:
l time since restart
l packets received
l packets processed
l current version
l previous version
l declined
l access denied
l bad length or format
l bad authentication
l rate exceeded
show voice real-time-analysis The following parameters are deprecated:
l Jitter(U)(msec)
l rvalue(U)
l Pkt-loss(U)(%)
l Delay(U)(usec)
l Jitter(D)(msec)
l rvalue(D)
The following new parameters are introduced:
l Jitter(D)(usec)
l UCC Score
show vrrp The ipv6, stats, and summary parameters are introduced.
snmp-server The IPv6 parameter is introduced.
user-role The following parameters are introduced:
l bandwidth-contract app
l bandwidth-contract appcategory
l bandwidth-contract exclude
l traffic-control-profile
l sso
vrrp The IPv6 parameter is introduced.
web-server The idp-certificate parameter is introduced.
wlan ssid-profile l The mfp-capable and mfp-required parameters are added.
l The eapol-rate-opt parameter is enabled by default.
Deprecated Commands
The following commands are deprecated in ArubaOS 6.4.0.0:
Command Description
interface tunnel The checksum parameter is deprecated.
Dell Networking W-Series ArubaOS 6.4.x | Reference Guide The ArubaOS Command-Line Interface | 11